The proposed method is helpful for design testing and fast prototyping of electronic devices.
#SMARKY 200F GENERATOR#
Our method can be used to configure any commercial marking laser into a pattern generator which prices are normally 1/3 up to 1/5 of commercial pattern generators. Ficha técnica Características y Ventajas Sistema láser para el marcado y grabado con la tecnología de fibra y diodos. This produces a result contrary to the common mask writer equipment where the photoresist exposed to the 405 nm laser is removed in the developer. A power of 8% is crucial to achieve this annealing effect only on the photoresist and to avoid permanent damaging on the chrome film and the glass. Our results indicate that the photoresist is hardened when exposed to the marking laser, and the unexposed photoresist is removed during the developing. The effect of the marking laser parameters such as speed, frequency, power and filling space is discussed in order to produce high quality patterns. In this work, we configured a SISMA Big Smarky 200F 20 W marking laser (Yb 1064 nm) as a pattern generator to produce photomasks with a resolution of up to 10 um. Custom circuit designs are normally transferred onto the photomask using pattern generators (mask writer) with a 405 nm laser. Photomasks are normally comprised of a glass substrate (~1-3 mm), followed by a chrome film (~100 nm) and on top of these two a positive photoresist (~500 nm). As an additional safety feature can the CPU at failure of the intercom is switched off and announcements in all areas be discontinued.The photomasks are very useful for the mass production of electronic devices and integrated circuits with resolution of up to 0.6 um using optical lithography. In the hand-held microphone of built-in beeper to monitor the MIC capsule including the acoustic-electric conversion.
#SMARKY 200F ISO#
Monitoring of control and audio paths, as well as the preamplifier according to EN 60849, EN54-16 and ISO 7240-16. Sisma is considered as a pioneer in the production of new generation of Laser systems, which allow the. Adjustable microphone and speaker levels. Built-in speaker to listen to the chime programmable before and/or after the broadcast. The advanced features of the laser source allow to carry out engraving, marking and cutting operations in line with the highest technical standards. 200F EP 1064 nm 20 W 1000 kHz 3-500 ns 0,03-1 mJ 2 20 m 300F 30 W 2 20 m 400F 40 W 11000 kHz 10-240 ns 0,16. Ready light, General failure indicator and VU-meter. Start, pause, skip and stop alarm sequences in specific sections of the fire
Activation of preprogrammed transfers of any sources in any areas
#SMARKY 200F MANUAL#
Manual announcements are made into selectable areas, call
Entering emergency mode, with or without a pre-programmed emergency sequence with stored messages through the covered alarm key Very easy to use with preprogrammed features, including: Up to 4 Key Extension Units RM-210 or 2 RM-320F per Emergency Remote Microphoneįire station with easy-to-use hand-held microphone with talk button, 3 programmable buttons and a button with folding safety cover with emergency functions, expandable to Max 55 keys.CPU-switch for emergency broadcast to all zones even in case of a CPU error.For activation of emergency mode, start and stop automatic broadcasts of emergency announcements, reset emergency signals, and live microphone announcements.Connecting the optional RM-210, RM-320F Extension units to the RM-200SF expands the number of function keys and indicators in blocks of ten. The RM-200SF has three function keys that can be set as individual or group selection keys, and each key is linked with the corresponding two indicators.
It offers a surveillance function to detect failures including microphone element failure. The high quality laser source with 410mm of Z axis, gives the marking parameter of 180x180 mm on its wide working chamber. Zone selection and microphone announcement can be made at the time of emergency broadcast. This innovative laser machine works by utilizing Fiber Ytterbium laser beam which emit light with a wavelength of 1064µm (10x smaller diameter compared to Co2 marking laser). It is equipped with an Emergency key, permitting it to be used as a remote microphone for emergency broadcast. BIG SMARKY Flexible and functional laser system for quality and high precision marking. The RM-200SF is a Fireman's Microphone of the matrix system. BIG SMARK can be fitted with all SISMA accessories, with the coaxial vision system (CVS) and with the Pattern Matching software.
0 kommentar(er)
